Build Your Own Rapier

Allow 10 to 12 weeks to ship.
  • Click on images to make your selection.

    *Choose Your Guard

    Click the magnifying glass in the bottom right corner of each image for an alternative view.


    • 135 $
    • 185 $
    • 215 $
    • 340 $
    • 285 $
    • 340 $
    • 355 $
    • 220 $
    • 225 $
    • 320 $
    • 295 $
    • 315 $
    • 305 $
    • 320 $
    • 320 $
    • 335 $
    • 350 $

    Please choose all options on the previous page before continuing


    • 90 $

    • 90 $
    • 90 $
    • 90 $
    • 90 $
    • 90 $

    • 90 $

    • $
    • 45 $

    • 0 $
    • 0 $

    • $
    • 65 $
    • 85 $

    Choose the guard symmetry based on left or right hand use (no change in symmetrical guards).


    Our blades are made from high quality 5160 spring steel bar stock tempered to the optimal point where maximum toughness & durability meets hardness, 50 HRC. 

    Click the magnifying glass in the top right corner of each image for an alternative view.


    • 175 $
    • 235 $
    • 270 $
    • 385 $

    These blades are offered in blade lengths from 35″ up to 45″ measured from the tang shoulder to the tip. On a rapier, this measurement would include the ricasso section.


    • $

    These blades are offered in blade lengths from 35″ up to 45″ measured from the tang shoulder to the tip. On a rapier, this measurement would include the ricasso section.


    • $

    These blades are offered in blade lengths from 35″ up to 42″ measured from the tang shoulder to the tip. On a rapier, this measurement would include the ricasso section.


    • $

    These blades are offered in blade lengths from 35″ up to 45″ measured from the tang shoulder to the tip. On a rapier, this measurement would include the ricasso section.


    • $

    Will this blade be used primarily for SCA combat or HEMA combat?


    • $
    • $

    It is highly recommended to get a spatulated tip on elite rapier blades due to their narrow profile.


    • $
    • 11 $

    • $

    • $

    • 36 $
    • 36 $
    • 59 $
    • 59 $
    • 69 $
    • 69 $
    • 100 $

    Choose your leather color. *Color may vary depending on monitor settings*


    • $

    A leather washer will be added to your complete sword during assembly.

    • $

    Pommel will be done in same finish as guard.


    • 30 $
    • 40 $
    • 65 $
    • 65 $
    • 65 $
    • 60 $
    • 60 $
    • 60 $
    • 60 $
    • 60 $

    *Confirm Your Order

    If you’re unsure about the parts of your sword or how to measure your blade click here to be directed to our terminology page.

    • $
Castille Armory

© Zenergy Metal Works, LLC DBA Castille Armory | 301 Grove Road, Unit A, Phoenix, Oregon 97535
All rights reserved. Site developed and hosted by Rogue Web Works.